Mathematical formulas placed in software that performs an analysis on a data set
|
This is an introduction to R (“GNU S”), a language and environment for statistical computing and graphics. R is similar to the award-winning1 S system, which was developed at Bell Laboratories by John Chambers et al. It provides a wide variety of statistical and graphical techniques (linear and nonlinear modelling, statistical tests, time series analysis, classification, clustering, ...). Show
This manual provides information on data types, programming elements, statistical modelling and graphics. Copyright © 1990 W. N. Venables 5 Arrays and matrices5.1 ArraysAn array can be considered as a multiply subscripted collection of data entries, for example numeric. R allows simple facilities for creating and handling arrays, and in particular the special case of matrices. A dimension vector is a vector of non-negative integers. If its length is k then the array is k-dimensional, e.g. a matrix is a 2-dimensional array. The dimensions are indexed from one up to the values given in the dimension vector. A vector can be used by R as an array only if it has a dimension vector as its dim attribute. Suppose, for example, > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 8 is a vector of 1500 elements. The assignmentgives it the dim attribute that allows it to be treated as a 3 by 5 by 100 array. Other functions such as > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 9 and > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)0 are available for simpler and more natural looking assignments, as we shall see in The > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)0 function. The values in the data vector give the values in the array in the same order as they would occur in FORTRAN, that is “column major order,” with the first subscript moving fastest and the last subscript slowest. For example if the dimension vector for an array, say > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2, is > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)3 then there are 3 * 4 * 2 = 24 entries in > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2 and the data vector holds them in the order > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)5. Arrays can be one-dimensional: such arrays are usually treated in the same way as vectors (including when printing), but the exceptions can cause confusion. 5.2 Array indexing. Subsections of an arrayIndividual elements of an array may be referenced by giving the name of the array followed by the subscripts in square brackets, separated by commas. More generally, subsections of an array may be specified by giving a sequence of index vectors in place of subscripts; however if any index position is given an empty index vector, then the full range of that subscript is taken. Continuing the previous example, > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)6 is a 4 * 2 array with dimension vector > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)7 and data vector containing the values c(a[2,1,1], a[2,2,1], a[2,3,1], a[2,4,1], a[2,1,2], a[2,2,2], a[2,3,2], a[2,4,2]) in that order. > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)8 stands for the entire array, which is the same as omitting the subscripts entirely and using > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2 alone. For any array, say > N <- table(blocks, varieties)0, the dimension vector may be referenced explicitly as > N <- table(blocks, varieties)1 (on either side of an assignment). Also, if an array name is given with just one subscript or index vector, then the corresponding values of the data vector only are used; in this case the dimension vector is ignored. This is not the case, however, if the single index is not a vector but itself an array, as we next discuss. 5.3 Index matricesAs well as an index vector in any subscript position, a matrix may be used with a single index matrix in order either to assign a vector of quantities to an irregular collection of elements in the array, or to extract an irregular collection as a vector. A matrix example makes the process clear. In the case of a doubly indexed array, an index matrix may be given consisting of two columns and as many rows as desired. The entries in the index matrix are the row and column indices for the doubly indexed array. Suppose for example we have a 4 by 5 array > N <- table(blocks, varieties)2 and we wish to do the following:
In this case we need a 3 by 2 subscript array, as in the following example. > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # Negative indices are not allowed in index matrices. > N <- table(blocks, varieties)7 and zero values are allowed: rows in the index matrix containing a zero are ignored, and rows containing an > N <- table(blocks, varieties)7 produce an > N <- table(blocks, varieties)7 in the result. As a less trivial example, suppose we wish to generate an (unreduced) design matrix for a block design defined by factors > Z <- array(data_vector, dim_vector)0 ( > Z <- array(data_vector, dim_vector)1 levels) and > Z <- array(data_vector, dim_vector)2 ( > Z <- array(data_vector, dim_vector)3 levels). Further suppose there are > Z <- array(data_vector, dim_vector)4 plots in the experiment. We could proceed as follows: > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv) To construct the incidence matrix, > Z <- array(data_vector, dim_vector)5 say, we could use However a simpler direct way of producing this matrix is to use > Z <- array(data_vector, dim_vector)6: > N <- table(blocks, varieties) Index matrices must be numerical: any other form of matrix (e.g. a logical or character matrix) supplied as a matrix is treated as an indexing vector. 5.4 The > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv) 0 functionAs well as giving a vector structure a > Z <- array(data_vector, dim_vector)8 attribute, arrays can be constructed from vectors by the > Z <- array(data_vector, dim_vector)9 function, which has the form > Z <- array(data_vector, dim_vector) For example, if the vector > Z <- array(h, dim=c(3,4,2))0 contains 24 or fewer, numbers then the command > Z <- array(h, dim=c(3,4,2)) would use > Z <- array(h, dim=c(3,4,2))0 to set up 3 by 4 by 2 array in > N <- table(blocks, varieties)0. If the size of > Z <- array(h, dim=c(3,4,2))0 is exactly 24 the result is the same as > Z <- h ; dim(Z) <- c(3,4,2) However if > Z <- array(h, dim=c(3,4,2))0 is shorter than 24, its values are recycled from the beginning again to make it up to size 24 (see Mixed vector and array arithmetic. The recycling rule) but > Z <- array(h, dim=c(3,4,2))5 would signal an error about mismatching length. As an extreme but common example makes > N <- table(blocks, varieties)0 an array of all zeros. At this point > N <- table(blocks, varieties)1 stands for the dimension vector > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)3, and > Z <- array(h, dim=c(3,4,2))9 stands for the data vector as it was in > Z <- array(h, dim=c(3,4,2))0, and > Z <- h ; dim(Z) <- c(3,4,2)1 with an empty subscript or > N <- table(blocks, varieties)0 with no subscript stands for the entire array as an array. Arrays may be used in arithmetic expressions and the result is an array formed by element-by-element operations on the data vector. The > Z <- array(data_vector, dim_vector)8 attributes of operands generally need to be the same, and this becomes the dimension vector of the result. So if > Z <- h ; dim(Z) <- c(3,4,2)4, > Z <- h ; dim(Z) <- c(3,4,2)5 and > Z <- h ; dim(Z) <- c(3,4,2)6 are all similar arrays, then makes > Z <- h ; dim(Z) <- c(3,4,2)7 a similar array with its data vector being the result of the given element-by-element operations. However the precise rule concerning mixed array and vector calculations has to be considered a little more carefully. 5.4.1 Mixed vector and array arithmetic. The recycling ruleThe precise rule affecting element by element mixed calculations with vectors and arrays is somewhat quirky and hard to find in the references. From experience we have found the following to be a reliable guide.
5.5 The outer product of two arraysAn important operation on arrays is the outer product. If > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2 and > Z <- array(data_vector, dim_vector)1 are two numeric arrays, their outer product is an array whose dimension vector is obtained by concatenating their two dimension vectors (order is important), and whose data vector is got by forming all possible products of elements of the data vector of > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2 with those of > Z <- array(data_vector, dim_vector)1. The outer product is formed by the special operator > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)4: An alternative is The multiplication function can be replaced by an arbitrary function of two variables. For example if we wished to evaluate the function f(x; y) = cos(y)/(1 + x^2) over a regular grid of values with x- and y-coordinates defined by the R vectors > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)5 and > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)6 respectively, we could proceed as follows: > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f) In particular the outer product of two ordinary vectors is a doubly subscripted array (that is a matrix, of rank at most 1). Notice that the outer product operator is of course non-commutative. Defining your own R functions will be considered further in Writing your own functions. An example: Determinants of 2 by 2 single-digit matricesAs an artificial but cute example, consider the determinants of 2 by 2 matrices [a, b; c, d] where each entry is a non-negative integer in the range 0, 1, …, 9, that is a digit. The problem is to find the determinants, ad - bc, of all possible matrices of this form and represent the frequency with which each value occurs as a high density plot. This amounts to finding the probability distribution of the determinant if each digit is chosen independently and uniformly at random. A neat way of doing this uses the > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)7 function twice: > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency") Notice that > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)8 here uses a histogram like plot method, because it “sees” that > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)9 is of class > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency")0. The “obvious” way of doing this problem with > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency")1 loops, to be discussed in Grouping, loops and conditional execution, is so inefficient as to be impractical. It is also perhaps surprising that about 1 in 20 such matrices is singular. 5.6 Generalized transpose of an arrayThe function > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency")2 may be used to permute an array, > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2. The argument > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency")4 must be a permutation of the integers {1, …, k}, where k is the number of subscripts in > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2. The result of the function is an array of the same size as > Xb <- matrix(0, n, b) > Xv <- matrix(0, n, v) > ib <- cbind(1:n, blocks) > iv <- cbind(1:n, varieties) > Xb[ib] <- 1 > Xv[iv] <- 1 > X <- cbind(Xb, Xv)2 but with old dimension given by > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency")7 becoming the new > d <- outer(0:9, 0:9) > fr <- table(outer(d, d, "-")) > plot(fr, xlab="Determinant", ylab="Frequency")8-th dimension. The easiest way to think of this operation is as a generalization of transposition for matrices. Indeed if > Z <- h ; dim(Z) <- c(3,4,2)4 is a matrix, (that is, a doubly subscripted array) then > Z <- h ; dim(Z) <- c(3,4,2)5 given by is just the transpose of > Z <- h ; dim(Z) <- c(3,4,2)4. For this special case a simpler function > evals <- eigen(Sm)$values2 is available, so we could have used > evals <- eigen(Sm)$values3. 5.7 Matrix facilitiesAs noted above, a matrix is just an array with two subscripts. However it is such an important special case it needs a separate discussion. R contains many operators and functions that are available only for matrices. For example > evals <- eigen(Sm)$values4 is the matrix transpose function, as noted above. The functions > evals <- eigen(Sm)$values5 and > evals <- eigen(Sm)$values6 give the number of rows and columns in the matrix > Z <- h ; dim(Z) <- c(3,4,2)4 respectively. 5.7.2 Linear equations and inversionSolving linear equations is the inverse of matrix multiplication. When after only > Z <- h ; dim(Z) <- c(3,4,2)4 and > Z <- array(data_vector, dim_vector)1 are given, the vector > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)5 is the solution of that linear equation system. In R, solves the system, returning > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)5 (up to some accuracy loss). Note that in linear algebra, formally > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 02 where > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 03 denotes the inverse of > Z <- h ; dim(Z) <- c(3,4,2)4, which can be computed by but rarely is needed. Numerically, it is both inefficient and potentially unstable to compute > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 05 instead of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 06.The quadratic form > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 07 which is used in multivariate computations, should be computed by something like17 > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 08, rather than computing the inverse of > Z <- h ; dim(Z) <- c(3,4,2)4. 5.7.3 Eigenvalues and eigenvectorsThe function > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 10 calculates the eigenvalues and eigenvectors of a symmetric matrix > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 11. The result of this function is a list of two components named > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 12 and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 13. The assignmentwill assign this list to > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 14. Then > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 15 is the vector of eigenvalues of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 11 and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 17 is the matrix of corresponding eigenvectors. Had we only needed the eigenvalues we could have used the assignment:> evals <- eigen(Sm)$values > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 18 now holds the vector of eigenvalues and the second component is discarded. If the expressionis used by itself as a command the two components are printed, with their names. For large matrices it is better to avoid computing the eigenvectors if they are not needed by using the expression > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 05.7.4 Singular value decomposition and determinantsThe function > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 19 takes an arbitrary matrix argument, > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 20, and calculates the singular value decomposition of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 20. This consists of a matrix of orthonormal columns > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 22 with the same column space as > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 20, a second matrix of orthonormal columns > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 24 whose column space is the row space of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 20 and a diagonal matrix of positive entries > Z <- h ; dim(Z) <- c(3,4,2)7 such that > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 27. > Z <- h ; dim(Z) <- c(3,4,2)7 is actually returned as a vector of the diagonal elements. The result of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 19 is actually a list of three components named > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 30, > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 31 and > Z <- array(data_vector, dim_vector)3, with evident meanings. If > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 20 is in fact square, then, it is not hard to see that> x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 1calculates the absolute value of the determinant of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 20. If this calculation were needed often with a variety of matrices it could be defined as an R function> x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 2after which we could use > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 35 as just another R function. As a further trivial but potentially useful example, you might like to consider writing a function, say > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 36, to calculate the trace of a square matrix. [Hint: You will not need to use an explicit loop. Look again at the > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 37 function.]R has a builtin function > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 38 to calculate a determinant, including the sign, and another, > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 39, to give the sign and modulus (optionally on log scale),5.7.5 Least squares fitting and the QR decompositionThe function > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 40 returns a list giving results of a least squares fitting procedure. An assignment such asgives the results of a least squares fit where > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)6 is the vector of observations and > N <- table(blocks, varieties)2 is the design matrix. See the help facility for more details, and also for the follow-up function > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 43 for, among other things, regression diagnostics. Note that a grand mean term is automatically included and need not be included explicitly as a column of > N <- table(blocks, varieties)2. Further note that you almost always will prefer using > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 45 (see Linear models) to > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 40 for regression modelling.Another closely related function is > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 47 and its allies. Consider the following assignments> x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 3These compute the orthogonal projection of > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)6 onto the range of > N <- table(blocks, varieties)2 in > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 50, the projection onto the orthogonal complement in > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 51 and the coefficient vector for the projection in > Z <- array(data_vector, dim_vector)1, that is, > Z <- array(data_vector, dim_vector)1 is essentially the result of the MATLAB ‘backslash’ operator. It is not assumed that > N <- table(blocks, varieties)2 has full column rank. Redundancies will be discovered and removed as they are found. This alternative is the older, low-level way to perform least squares calculations. Although still useful in some contexts, it would now generally be replaced by the statistical models features, as will be discussed in Statistical models in R. 5.8 Forming partitioned matrices, > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array. > x [,1] [,2] [,3] [,4] [,5] [1,] 1 5 9 13 17 [2,] 2 6 10 14 18 [3,] 3 7 11 15 19 [4,] 4 8 12 16 20 > i <- array(c(1:3,3:1), dim=c(3,2)) > i # i is a 3 by 2 index array. [,1] [,2] [1,] 1 3 [2,] 2 2 [3,] 3 1 > x[i] # Extract those elements [1] 9 6 3 > x[i] <- 0 # Replace those elements by zeros. > x [,1] [,2] [,3] [,4] [,5] [1,] 1 5 0 13 17 [2,] 2 0 10 14 18 [3,] 0 7 11 15 19 [4,] 4 8 12 16 20 > 55 and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array. > x [,1] [,2] [,3] [,4] [,5] [1,] 1 5 9 13 17 [2,] 2 6 10 14 18 [3,] 3 7 11 15 19 [4,] 4 8 12 16 20 > i <- array(c(1:3,3:1), dim=c(3,2)) > i # i is a 3 by 2 index array. [,1] [,2] [1,] 1 3 [2,] 2 2 [3,] 3 1 > x[i] # Extract those elements [1] 9 6 3 > x[i] <- 0 # Replace those elements by zeros. > x [,1] [,2] [,3] [,4] [,5] [1,] 1 5 0 13 17 [2,] 2 0 10 14 18 [3,] 0 7 11 15 19 [4,] 4 8 12 16 20 > 56As we have already seen informally, matrices can be built up from other vectors and matrices by the functions > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 55 and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 56. Roughly > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 55 forms matrices by binding together matrices horizontally, or column-wise, and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 56 vertically, or row-wise.In the assignment > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 4the arguments to > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 55 must be either vectors of any length, or matrices with the same column size, that is the same number of rows. The result is a matrix with the concatenated arguments arg_1, arg_2, … forming the columns.If some of the arguments to > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 55 are vectors they may be shorter than the column size of any matrices present, in which case they are cyclically extended to match the matrix column size (or the length of the longest vector if no matrices are given).The function > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 56 does the corresponding operation for rows. In this case any vector argument, possibly cyclically extended, are of course taken as row vectors.Suppose > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 64 and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 65 have the same number of rows. To combine these by columns into a matrix > N <- table(blocks, varieties)2, together with an initial column of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 67s we can useThe result of > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 56 or > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 55 always has matrix status. Hence > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 70 and > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 71 are possibly the simplest ways explicitly to allow the vector > f <- function(x, y) cos(y)/(1 + x^2) > z <- outer(x, y, f)5 to be treated as a column or row matrix respectively. 5.10 Frequency tables from factorsRecall that a factor defines a partition into groups. Similarly a pair of factors defines a two way cross classification, and so on. The function > Z <- array(data_vector, dim_vector)6 allows frequency tables to be calculated from equal length factors. If there are k factor arguments, the result is a k-way array of frequencies. Suppose, for example, that > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 74 is a factor giving the state code for each entry in a data vector. The assignmentgives in > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 75 a table of frequencies of each state in the sample. The frequencies are ordered and labelled by the > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 76 attribute of the factor. This simple case is equivalent to, but more convenient than,> x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 5Further suppose that > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 77 is a factor giving a suitably defined “income class” for each entry in the data vector, for example with the > x <- array(1:20, dim=c(4,5)) # Generate a 4 by 5 array.
> x
[,1] [,2] [,3] [,4] [,5]
[1,] 1 5 9 13 17
[2,] 2 6 10 14 18
[3,] 3 7 11 15 19
[4,] 4 8 12 16 20
> i <- array(c(1:3,3:1), dim=c(3,2))
> i # 78 function:
What are mathematical formulas placed in software that performs an analysis on a data set multiple choice question?True or false: Algorithms are mathematical formulas placed in software that performs an analysis on a data set.
What are mathematical formulas placed in software that performs an analysis on a dataset quizlet?Algorithm. Mathematical formulas placed in software that performs an analysis on a dataset.. Analytics. The science of fact-based decision making.. Anomaly detection. ... . Big data. ... . Business analytics. ... . Business intelligence (BI) ... . Business process. ... . Business strategy.. Which type of analytics finds patterns in numerical data?Data mining definition
Data mining, sometimes used synonymously with “knowledge discovery,” is the process of sifting large volumes of data for correlations, patterns, and trends. It is a subset of data science that uses statistical and mathematical techniques along with machine learning and database systems.
What is a data value that is numerically distant from most of the other data points in a set of data?An outlier is any value that is numerically distant from most of the other data points in a set of data. We know that -86 is far below any of the other values in our data set. It is not uncommon to find an outlier in a data set.
|
