How do I open ImageMagick on Windows?

How do I open ImageMagick on Windows?
How do I open ImageMagick on Windows?

This page provides information specific to ImageMagick installed via a "setup.exe" style installation wizard under Microsoft Windows. It applies only to the pre-built "binaries" package, and not to versions compiled from source code. If you would like to install ImageMagick from source code, then please refer to the ImageMagick installation guide .

How do I open ImageMagick on Windows?
Normal Installation

Prerequisites

While multiple versions of ImageMagick may be installed at one time, if your intention is to replace a prior installation of ImageMagick with a newer version, then it may be wise to uninstall the existing ImageMagick (see uninstall procedure) prior to installing the newer version.

While it is not a requirement, it is strongly recommended that the Ghostscript package be installed. ImageMagick uses Ghostscript to render Postscript and PDF files, as well as formats where a translator to Postscript is available. ImageMagick will also use the fonts delivered with Ghostscript to support the standard set of Postscript fonts.

The installation package includes the ImageMagick Perl extension ( PerlMagick) as an installation option. If you would like to use this extension, then you must install ActiveState ActivePerl prior to commencing with installation of ImageMagick.

Retrieve Install Package

Retrieve the ImageMagick Windows binary install package from a one of the ftp sites listed at the ImageMagick Download Sites page. The file will be named similar to ImageMagick-i686-pc-windows.exe (QuantumDepth=16 version) or ImageMagick-i686-Q8-windows.exe (QuantumDepth=8 version),and should be found in the 'binaries' subdirectory of the ftp site. Note that the QuantumDepth=8 version consumes much less memory and CPU than the QuantumDepth=16 version, but provides less color resolution.

Start Installation Wizard

Execute the downloaded file from your browser or by double-clicking on the filename from within Windows Explorer. The ImageMagick Setup Wizard will appear. Click on “Next>” to continue.

Select Destination Directory

Specify what drive and directory to install ImageMagick into. Approximately 13MB of free disk space is required to install ImageMagick. The default installation directory is similar to “C:\Program Files\ImageMagick-5.5.3-Q16”. Once you have entered the desired installation directory, then select “Next>” to continue.

Select Start Menu Folder

Select the folder where you would like the program's shortcuts to appear. The default should normally be satisfactory. Click on “Next>” to continue.

Select Additional Tasks

A screen is displayed which provides the option to create a desktop shortcut icon to the imdisplay program and to update the executable search path so that ImageMagick is available without specifying the full path to the programs. The default is to enable both of these. Once you have made your selections, click on “Next>” to continue.

Ready to Install

A screen is displayed which displays the selected options. If you are not satisfied with a selected option, then click on “

Installation Progress

While the install program is performing the installation, it will display what it is doing in an installation progress window.

Finishing Up

By default “View ImageMagick.html” is check-marked. This causes the ImageMagick web pages to be displayed in a browser when “Finish” is selected. If you do not want to view the web pages, then de-select “View ImageMagick.html”. Select “Finish” to exit the installation program.
Under Windows '95 and Windows '98 it will be necessary to reboot the system in order for some settings to take effect (such as executable search path) since these are set in autoexec.bat.

Testing The Installation

Select “Command Prompt” from the Windows Start menu. Within the window type

convert logo: logo.miff
imdisplay logo.miff

and the ImageMagick logo should be displayed in a window. Note that NT-based Windows systems come with a program named 'convert' and if your path is set incorrectly, the wrong convert program will be executed!

How do I open ImageMagick on Windows?
Advanced Installation

[ The following is transcribed from the Inno Setup documentation. Inno Setup is used to create the binary install package. This information may be of value if the ImageMagick installation must be automated (e.g. If it is installed as part of another package). ]

The Setup program accepts optional command line parameters. These can be useful to system administrators, and to other programs calling the Setup program.

/SP Disables the "This will install... Do you wish to continue?" prompt at the beginning of Setup. Of course, this will have no effect if the DisableStartupPrompt [Setup] section directive was set to yes. /SILENT, /VERYSILENT Instructs Setup to be silent or very silent. When Setup is silent the wizard and the background window are not displayed but the installation progress window is. When a setup is very silent this installation progress window is not displayed. Everything else is normal so for example error messages during installation are displayed and the startup prompt is (if you haven't disabled it with DisableStartupPrompt or the '/SP-' command line option explained above) If a restart is necessary and the '/NORESTART' command isn't used (see below) and Setup is silent, it will display a Reboot now? messagebox. If it's very silent it will reboot without asking. /NORESTART Instructs Setup not to reboot even if it's necessary. /LOADINF="filename" Instructs Setup to load the settings from the specified file after having checked the command line. This file can be prepared using the '/SAVEINF=' command as explained below. Don't forget to use quotes if the filename contains spaces. /SAVEINF="filename" Instructs Setup to save installation settings to the specified file. Don't forget to use quotes if the filename contains spaces. /DIR=“x:\dirname” Overrides the default directory name displayed on the Select Destination Directory wizard page. A fully qualified pathname must be specified. If the [Setup] section directive DisableDirPage was set to yes, this command line parameter is ignored. /GROUP="folder name" Overrides the default folder name displayed on the Select Start Menu Folder wizard page. If the [Setup] section directive DisableProgramGroupPage was set to yes, this command line parameter is ignored. /NOICONS Instructs Setup to initially disable the Don't create any icons check box on the Select Start Menu Folder wizard page. /COMPONENTS="comma separated list of component names" Overrides the default components settings. Using this command line parameter causes Setup to automatically select a custom type.

How do I open ImageMagick on Windows?
Uninstall

The ImageMagick package incorporates its own uninstall functionality. Always remove an installed ImageMagick via its uninstall function since manually removing it (such as by removing its installation directory) will leave behind the registry entries and path settings established at install time.

Under Windows '95 and Windows '95, use the “Uninstall” entry in the ImageMagick portion of the Windows start menu to initiate the uninstall.

On NT 4.0 and 5.X -based systems, ImageMagick should be removed via the “Add or Remove Programs” area of the Windows Control Panel. Select the ImageMagick package from the list, and click on “Change/Remove” to uninstall it.

How do I open ImageMagick on Windows?
Use From Another Package or Program

The ImageMagick utilities (e.g. convert, mogrify, composite, ...) may be executed as a sub-process by other programs. If the utilities are not in the systems executable search path (they should be since the ImageMagick install extends the path), then the utility should be executed via the complete path to the executable. Note that systems other than Windows '9X/ME provide a “convert.exe” as part of the operating system. Care must be taken to avoid executing the wrong “convert.exe” by mistake.

A package which is linked against the ImageMagick core DLLs may use the DLLs from an installed ImageMagick, provided that the ImageMagick release versions are identical, and the value of QuantumDepth matches the value used when building the package. One way to ensure this is to include a matching ImageMagick installation package along with your own package.

In order to facilitate building C and C++ programs that use ImageMagick without requiring building ImageMagick from source code, the header files and link libraries required to build programs using Visual C++ 7.0 are provided in “include” and “lib” subdirectories under the installation directory. Using these headers and libraries to build your dependent application ensures that they will be compatible with the release DLLs.

Note that the DLLs and libraries are built using Visual C++ 7.0 (.net). In order to use Magick++, you must either use the same compiler version used to build the distribution, or download the Windows source package and build everything yourself. While it should be possible to use the MinGW gcc compiler with the CORE_RL_magick_.dll (ImageMagick C library), it will certainly not be possible to use it with CORE_RL_Magick++_.dll (ImageMagick C++ library) due to name mangling differences.

The following project build options (change “C:\ImageMagick” to whever you have chosen to install) should ensure compatibility with the headers and libraries as delivered:

Key Name

Key Type

Proprocessor Definitions

NDEBUG,WIN32,_CONSOLE,_VISUALC_,NeedFunctionPrototypes,_DLL,_MAGICKMOD_

Compilation Options

/nologo /MD /W3 /GX /Zi /O2 /I "." /I "C:\\ImageMagick\include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_VISUALC_" /D "NeedFunctionPrototypes" /D "_DLL" /D "_MAGICKMOD_" /FD /c

Linker Options

CORE_RL_magick_.lib CORE_RL_Magick++_.lib X11.lib kernel32.lib user32.lib gdi32.lib odbc32.lib odbccp32.lib ole32.lib oleaut32.lib winmm.lib dxguid.lib wsock32.lib advapi32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /libpath:"C:\ImageMagick\lib\"

Resource Options

/l 0x409 /d "NDEBUG"

When ImageMagick is installed, entries are added to the Windows Registry so that other programs may obtain information regarding the most recently installed ImageMagick. These entries are available under the registry path

HKEY_LOCAL_MACHINE\SOFTWARE\ImageMagick\Current

These keys are currently available:

Key Name

Key Type

Description

BinPath

REG_SZ

Directory where ImageMagick executables are installed

ConfigurePath

REG_SZ

Directory where configuration files are installed

LibPath

REG_SZ

Directory where ImageMagick core DLLs are installed

ModulesPath

REG_SZ

Directory where ImageMagick loadable modules are installed

QuantumDepth

REG_DWORD

Number of bits in a pixel quantum. A pixel quantum is used to store part of a color (e.g. red component)

Version

REG_SZ

ImageMagick version

In addition to registry entries which provide information on the most recently installed ImageMagick (which is not necessarily the newest version installed), registry entries are available for specific versions of installed ImageMagick packages. These registry entries are available under a registry path of the form:

HKEY_LOCAL_MACHINE\SOFTWARE\ImageMagick\VERSION\QDEPTH

where VERSION represents the ImageMagick version and DEPTH (which may have the values 8 or 16) represents the number of bits per pixel quantum. Packages which require a particular version of ImageMagick built with a specific QuantumDepth may find a matching installation via these registry entries.

These keys are currently available:

Key Name

Key Type

Description

BinPath

REG_SZ

Directory where ImageMagick executables are installed

ConfigurePath

REG_SZ

Directory where configuration files are installed

LibPath

REG_SZ

Directory where ImageMagick core DLLs are installed

ModulesPath

REG_SZ

Directory where ImageMagick loadable modules are installed

SharePath

REG_SZ

Directory where configuration files are installed


How do I open ImageMagick on Windows?
How do I open ImageMagick on Windows?
Image manipulation software that works like magic.

Does ImageMagick work on Windows?

You can install ImageMagick from source. However, if you don't have a proper development environment or if you're anxious to get started, download a ready-to-run Linux or Windows executable.

Where can I find ImageMagick?

The client path is the execution path of your ImageMagick client (e.g. /usr/local ) . Above, $PREFIX is the default install path, typically c:\\Program Files\\ImageMagick-7.1. 0 .

Is ImageMagick still maintained?

It was freely released in 1990 when DuPont agreed to transfer copyright to ImageMagick Studio LLC, still currently the project maintainer organization.

What is ImageMagick command?

ImageMagick includes a number of command-line utilities for manipulating images. Most of you are probably accustomed to editing images one at a time with a graphical user interface (GUI) with such programs as Gimp or Photoshop. However, a GUI is not always convenient.